#7881 closed bug (no change required)
Fujitsu Lifebook P1120 support
Reported by: | cb88 | Owned by: | nobody |
---|---|---|---|
Priority: | normal | Milestone: | |
Component: | - General | Version: | R1/alpha3 |
Keywords: | Cc: | ||
Blocked By: | Blocking: | ||
Platform: | All |
Description
I am attaching the hrev42507 syslog.
The P1120 is partially functional
Things missing are IDE DMA which Linux supports I can also find the patches online which added the support to Linux if anyone is interested. Apparently this roughly doubles IO throughput and would be highly welcome. If it can't be supported in the current driver then I would appreciate if it were blacklisted if possible so I can boot without debug options.
Longrun driver not in base install so no freq scaling without grabbing the driver from Haikuware.
Radeon driver works but sets a depth which is incompatible with 3D rendering depth, as it only has 8Mb vram, should be 16bit if 3D is desired otherwise the default 32bit is ok this is just for reference.
The rtl8139 driver is currently not working though it was working back around alpha3 and the BeOS driver loads but I have not tested it.
The touchscreen works but cannot be calibrated as far as I can tell if it can please tell me otherwise.
relevant output of listusb: 0430:0508 /dev/bus/usb/0/2 "Fujitsi Takamisawa" "USB Touch Panel" ver. 1120
the longrun driver from Haikuware works well though is poorly integrated I might try re-porting it from freebsd myself and integrate it with the GUI Haiku already has.
The battery applet works quite well. I have a 3800mAh battery. 480mAh with screen dimmed and 734mAh at max brightness. Loading the system with GLTeapot 860mAh dim and 1050mAh bright... rather impressive anyway. So battery life is approximately between 8.2 hours and 3.62 hours.
I can create tickets for the IDE and touchscreen separately if its needed.
Attachments (1)
Change History (5)
by , 13 years ago
Attachment: | syslog-r42507.txt added |
---|
comment:1 by , 13 years ago
comment:3 by , 5 years ago
Resolution: | → no change required |
---|---|
Status: | new → closed |
Please open individual tickets for each broken component, if they even still are.
comment:4 by , 5 years ago
Milestone: | R1 |
---|
Remove milestone for tickets with status = closed and resolution != fixed
typo relevant output of listusb: 0430:0508 /dev/bus/usb/0/2 "Fujitsi Takamisawa" "USB Touch Panel" ver. 1130
Version number was wrong.