Linksys wireless not working

[ryanmk54]

I have a Linksys PCI adapter w/SRX and a MIMO card. Haiku recognizes it in listdev, but when I right click the network status, the only thing that shows is my ethernet port. In the network preferences the ethernet is also the only thing showing. The power light on the receiver doesn't turn on. I am using hrev42860.

device Network controller (Ethernet controller) [2|0|0]
  vendor 10b7: 3Com Corporation
  device 9055: 3c905B 100BaseTX [Cyclone]

device Network controller (Ethernet controller) [2|0|0]
  vendor 17cb: Airgo Networks Inc
  device 0001: AGN100 802.11 a/b/g True MIMO Wireless Card

device Bridge (PCI bridge, Normal decode) [6|4|0]
  vendor 1011: Digital Equipment Corporation
  device 0024: DECchip 21152

device Communication controller (Serial controller, 16550) [7|0|2]
  vendor 12b9: 3Com Corp, Modem Division
  device 1008: 56K FaxModem Model 5610

device Mass storage controller (SCSI storage controller) [1|0|0]
  vendor 9004: Adaptec
  device 5078: AIC-7850

device Bridge [6|80|0]
  vendor 8086: Intel Corporation
  device 7113: 82371AB/EB/MB PIIX4 ACPI

device Serial bus controller (USB controller, UHCI) [c|3|0]
  vendor 8086: Intel Corporation
  device 7112: 82371AB/EB/MB PIIX4 USB

device Mass storage controller (IDE interface) [1|1|80]
  vendor 8086: Intel Corporation
  device 7111: 82371AB/EB/MB PIIX4 IDE

device Bridge (ISA bridge) [6|1|0]
  vendor 8086: Intel Corporation
  device 7110: 82371AB/EB/MB PIIX4 ISA

device Display controller (VGA compatible controller, VGA controller) [3|0|0]
  vendor 1002: ATI Technologies Inc
  device 4742: 3D Rage Pro AGP 1X/2X

device Bridge (PCI bridge, Normal decode) [6|4|0]
  vendor 8086: Intel Corporation
  device 7191: 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge

device Bridge (Host bridge) [6|0|0]
  vendor 8086: Intel Corporation
  device 7190: 440BX/ZX/DX - 82443BX/ZX/DX Host bridge

[anevilyak]

Listdev isn't indicative of a supported driver being present, it simply shows what's found on the PCI bus like lspci on Linux. In any case, that AirGo chipset isn't one we currently have a driver for.

[waddlesplash]

Seems FreeBSD only supports this via ndiswrapper. Does anyone care about it enough to spend the time porting that?

[waddlesplash]

At this point, it seems not worth it.

[pulkomandy]

For reference in case someone wants to look into it anyways: there was a Linux driver but it was not fully upstreamed apparently: ​https://git.sipsolutions.net/agnx.git/tree/