#8407 closed bug (invalid)
kernel panic on boot when Local APIC enabled (Dell Poweredge T300)
| Reported by: | myob | Owned by: | mmlr |
|---|---|---|---|
| Priority: | normal | Milestone: | |
| Component: | System/Kernel | Version: | R1/Development |
| Keywords: | boot-failure | Cc: | |
| Blocked By: | Blocking: | ||
| Platform: | All |
Description
If Local APIC is enabled on a Dell PowerEdge T300 (Quad Core2-based Xeon, 4GB RAM, doesn't appear to have HT or at least no BIOS options), Haiku will give a kernel panic almost instantly
If disabled it boots perfectly (albeit with some occasional USB oddities but these may be down to a cheap, dodgy mouse) and obviously only 1 core is available to use.
I've attached a photo of the panic. Using hrev43877
Attachments (1)
Change History (9)
by , 13 years ago
| Attachment: | 2012-03-21-004.jpg added |
|---|
comment:1 by , 13 years ago
| Owner: | changed from to |
|---|---|
| Status: | new → assigned |
| Version: | R1/alpha3 → R1/Development |
comment:2 by , 13 years ago
One of the few things the BIOS does have in it is a very old-fashioned IRQ settings panel so that may not be as much of an issue. Initially the OS would fail to start with the mouse in it IO-APIC was also disabled and its also occasionally run to about 80% CPU and frozen the mouse unless plugged out/in. Keyboard (also USB) works fine so I'm suspecting the no-brander mouse.
comment:3 by , 13 years ago
| Blocking: | 7665 added |
|---|
comment:4 by , 6 years ago
| Keywords: | boot-failure added |
|---|
comment:5 by , 6 years ago
| Blocking: | 7665 removed |
|---|
comment:8 by , 5 years ago
| Milestone: | R1 |
|---|
Remove milestone for tickets with status = closed and resolution != fixed
Looks like an interrupt routing issue....it's somewhat expected that there might be issues with LAPIC disabled since that's needed (as well as the IO-APIC) for any interrupt routing to happen, so the USB weirdness is most likely due to interrupt issues.