Cannot see Windows partitions

[dsjonny]

I noticed that Haiku cannot see the Windows partitions on the disk, so cannot mount they. Please see the attached screenshot of DriveSetup: Using 45732 nightly.

[dsjonny]

In Windows I can see this.

[dsjonny]

On Windows I can see this:

[phoudoin]

Sounds like and issue with GUID partition reader. Could you attach the first 4kb dump of this disk?

[dsjonny]

I used this, I hope this is ok:

~/Desktop> dd if=/dev/disk/scsi/0/5/0/raw of=disk.dump count=4k
4096+0 records in
4096+0 records out
2097152 bytes (2,1 MB) copied, 0,241976 s, 8,7 MB/s

disk.dump.zip has been attached to the ticket.

[phoudoin]

That 512 times more that what was needed, but no problem ;-) Thanks.

[phoudoin]

I guess it's a SSD disk, right?

[dsjonny]

Yes, this is a 64GB mSATA SATA II SSD drive.

[korli]

Is it on GCC4?

[dsjonny]

No. I always use the recommended 'x86 GCC 2 Hybrid' nightlies.

[dsjonny]

I have reinstalled the Windows 8, and now I see it under Haiku (using hrev46033). Also I have attached the disk2.dump file to the ticket. Maybe It will help. I have no idea what is the different, why there is difference, because I did the same as many times. And from Windows side all the same.

[dsjonny]

After may reinstall of the Windows I did not met with the problem. I think the ticket can close.