Opened 8 years ago
Last modified 4 years ago
#12936 new bug
CD/DVD: Change startsequence to ask drives past Desktop is loaded
| Reported by: | lelldorin | Owned by: | nobody |
|---|---|---|---|
| Priority: | normal | Milestone: | R1.1 |
| Component: | Drivers/Disk/ATA | Version: | R1/Development |
| Keywords: | Cc: | ||
| Blocked By: | Blocking: | ||
| Platform: | All |
Description (last modified by )
If i have a DVD into my dvd-drive the system need a very long time to load the system.
Is it possible to change asking the DVD/CD/Blue-Ray drive past the Desktop was loaded?
People do not know why the system hangs up at start up.
Attachments (1)
Change History (5)
comment:1 by , 8 years ago
comment:2 by , 8 years ago
Done, i add all informations i can get from the system using BeSlySAT (Syslog included)
comment:3 by , 8 years ago
| Cc: | removed |
|---|---|
| Component: | - General → Drivers/Disk/ATA |
| Description: | modified (diff) |
| Type: | enhancement → bug |
Probably has something to do with this:
KERN: ata 4 error: command failed, error bit is set. status 0x51, error 0x54 KERN: atapi 4-0 error: device indicates transfer error after dma KERN: check_sense: Illegal request KERN: IOCache::_TransferRequestLine(): Failed to read into cache (offset: 0, length: 1048576), trying uncached read (offset: 0, length: 512)
comment:4 by , 4 years ago
| Milestone: | R1 → R1.1 |
|---|
Note:
See TracTickets
for help on using tickets.
I would rather fix the problem and find out why this is slow (it shouldn't be). Can you attach a syslog?