XHCI: Mouse on USB port dies

[humdinger]

This hrev51536.

I had a wireless USB mouse dongle for testing on a USB3 port. After 20 minutes it died for some reason. Here's the syslog entries:

Wireless mouse dongle on USB3 port died:

KERN: usb hub 2: port 1: device removed
KERN: usb xhci -1: cancel queued transfers for pipe 0x82be6c70 (1)
KERN: usb xhci -1: cancel queued transfers for pipe 0x82bee040 (0)
KERN: usb xhci -1: KERN: cancel queued transfers for pipe 0x82be6c70 (1)
KERN: usb hub 2: port 1: new device connected
KERN: usb error xhci -1: unsuccessful command Parameter (17)
KERN: usb xhci -1: cancel queued transfers for pipe 0x827a3ec8 (0)

Removed mouse dongle:

KERN: usb hub 2: port 1: device removed
KERN: usb xhci -1: cancel queued transfers for pipe 0xd6dcc398 (0)
KERN: usb xhci -1: KERN: cancel queued transfers for pipe 0xd5536258 (1)

Re-attached mouse dongle:

KERN: usb hub 2: port 1: new device connected
KERN: usb error xhci -1: unsuccessful command Parameter (17)
KERN: usb xhci -1: cancel queued transfers for pipe 0x827a3ec8 (0)

Still the mouse doesn't work.

Hardwareinfo: listusb

062a:4102 /dev/bus/usb/0/1 "MosArt Semiconductor Corp." "2.4G Wireless
Mouse" ver. 0312
8087:07da /dev/bus/usb/0/6 "Intel Corp." "" ver. 7869
04f2:b35a /dev/bus/usb/0/7 "Chicony Electronics Co., Ltd" "Chicony USB 2.0
Camera" ver. 9162
0000:0000 /dev/bus/usb/0/hub "HAIKU Inc." "XHCI RootHub" ver. 0300
8087:8008 /dev/bus/usb/1/0/hub "Intel Corp." "" ver. 0005
0000:0000 /dev/bus/usb/1/hub "HAIKU Inc." "EHCI RootHub" ver. 0200
8087:8000 /dev/bus/usb/2/0/hub "Intel Corp." "" ver. 0005
0000:0000 /dev/bus/usb/2/hub "HAIKU Inc." "EHCI RootHub" ver. 0200

listdev

device Serial bus controller (USB controller, EHCI) [c|3|20]
  vendor 8086: Intel Corporation
  device 8c26: 8 Series/C220 Series Chipset Family USB EHCI #1

device Serial bus controller (USB controller, EHCI) [c|3|20]
  vendor 8086: Intel Corporation
  device 8c2d: 8 Series/C220 Series Chipset Family USB EHCI #2

device Serial bus controller (USB controller, XHCI) [c|3|30]
  vendor 8086: Intel Corporation
  device 8c31: 8 Series/C220 Series Chipset Family USB xHCI

[humdinger]

Added a syslog when cleanly booting. 2 minutes later, the USB mouse on another port (this time USB2) died again. This time with no syslog entry... I'm blacklisting xhci again.

[humdinger]

clean syslog

[korli]

I have about the same issue, the keyboard is also affected: #13767

[oxoocoffee]

I was trying to boot hrev52775 x64 nightly anyboot on my system today. Booting from both USB2 and USB3 causes kernel panic. Talked on irc to waddlesplash about it and I was asked to update this ticket with my information. My system is Asus Prime Z370-A Bios Ver 1601, 32G RAM, i7-8700K, GForce GTX 960

EDIT: Here are screenshots booting from USB2 port ​https://i.postimg.cc/DyhR4C36/Haiku-USB2.jpg and USB3 ​https://i.postimg.cc/bYxBPQSt/Haiku-USB3.jpg

[oxoocoffee]

Booting from USB3 pen drive

[oxoocoffee]

Booting from USB2 Pen drive

[waddlesplash]

I've added a bit more information to the error message in hrev52885, please re-test and add a new syslog on that revision.

[waddlesplash]

It seems clear to me now that "error Parameter" is unrelated to the mouse death.

[waddlesplash]

Please retest after hrev52966; this fixed a nasty race condition which was likely related.

[humdinger]

After about 4 hours my mouse is still walzing on its pad like a young Travolta. Thanks!

[waddlesplash]

Hooray!