Opened 3 years ago
Closed 20 months ago
#16731 closed bug (invalid)
Can't connect to internet
| Reported by: | RogellParadox | Owned by: | nobody |
|---|---|---|---|
| Priority: | high | Milestone: | Unscheduled |
| Component: | Drivers/Network/rtl81xx | Version: | R1/beta2 |
| Keywords: | Cc: | ||
| Blocked By: | Blocking: | ||
| Platform: | x86 |
Description (last modified by )
So, I basically installed Haiku some days ago, but I had no luck with connecting to network. I boot Windows, macOS and Ubuntu as well and they have no problems with my adapter (Realtek® GbE LAN chip (10/100/1000 Mbit) in my GA-A320M-S2H motherboard).
But with Haiku, i had problems with DHCP. The syslog can be found in the attached file "result". Since some guys who tried to help me on Telegram told me to change to static, I set every single information carefully and applied the changes. The LAN status becomes "ready", but I still can't browse. The syslog for connection set as Static is in the file "result_02". Thank you for your patience!
Attachments (2)
Change History (8)
by , 3 years ago
| Attachment: | result.txt added |
|---|
by , 3 years ago
| Attachment: | result_02.txt added |
|---|
comment:1 by , 3 years ago
| Description: | modified (diff) |
|---|
comment:2 by , 3 years ago
| Component: | Network & Internet/IPv4 → Drivers/Network/rtl81xx |
|---|---|
| Keywords: | internet connection network removed |
| Owner: | changed from to |
comment:3 by , 3 years ago
comment:4 by , 3 years ago
This kind of problem would have been visible in a full syslog, which includes the pci devices configuration. Anyhow Haiku should support the device when the option is enabled.
comment:5 by , 23 months ago
Please retest on a new nightly. If it still does not work with the "Above 4G decoding" option enabled, please post a complete syslog.
comment:6 by , 20 months ago
| Resolution: | → invalid |
|---|---|
| Status: | new → closed |
No reply in 3 months, nor to the earlier request for a syslog.
Turns out the problem was an option in the BIOS, "Above 4G decoding". Disabling it solved the problem. Thanks anyone who tried to help.