Context Navigation

#17272 closed bug (fixed)

Slow network transfer

Reported by:	jens	Owned by:	nobody
Priority:	normal	Milestone:	Unscheduled
Component:	Drivers/Network/ipro1000	Version:	R1/beta3
Keywords:		Cc:	mmlr
Blocked By:		Blocking:
Platform:	All

Description

This is similar to #14344.

ping to google is fine
curl to google is very slow (minutes)
package updater times out
direct wired connection to router
both with DHCP enabled or disabled
with Google's DNS servers (8.8.8.8 and 8.8.4.4)
a Debian installation on the same machine works fine

This is a fresh install from haiku-r1beta3-x86_64-anyboot.iso , and the machine is a Lenovo ThinkCentre 7360 whp. I can provide logs and information about the chipset as required. This machine has #4555 as well, in case it is a chipset problem.

Attachments (2)

console.txt (538 bytes ) - added by jens 3 years ago.: console output
syslog.txt (297.8 KB ) - added by jens 3 years ago.: syslog

Download all attachments as: .zip

Change History (36)

comment:1 by Coldfirex, 3 years ago

What model nic? Yes, please provide logs. It would be interesting if you could update to the nightlies and grab the logs from that since debug levels are higher.

comment:2 by waddlesplash, 3 years ago

Please check your CPU usage: Is the machine using a lot even at idle? (Where is it going if so?)

comment:3 by diver, 3 years ago

Component:	Network & Internet/IPv4 → Drivers/Network/ipro1000
Owner:	changed from axeld to nobody

Looks like Lenovo ThinkCentre 7360 whp uses intel 82567LM nic.

comment:4 by jens, 3 years ago

Updated to haiku-master-hrev55436-x86_64-anyboot.zip CPU are idle from what I can tell. This is directly after boot. The curl was successful once, but I didn't time that. After that it timed out.

by jens, 3 years ago

Attachment:	console.txt added

console output

by jens, 3 years ago

Attachment:	syslog.txt added

syslog

comment:5 by diver, 3 years ago

Probably related to More than 99% interrupts of vector 16 are unhandled message.

comment:6 by diver, 3 years ago

Please enter KDL using /bin/kernel_debugger and type ints followed by es to exit KDL. After a few seconds output of ints should be written to the end of the syslog. You can then post this output here.

comment:7 by Coldfirex, 3 years ago

Extra info: previously fixed but related issues:

https://dev.haiku-os.org/ticket/8984

https://dev.haiku-os.org/ticket/9718

comment:8 by jens, 3 years ago

The kernel debugger draws some white space at the top of the screen and freezes right away, both if I start it from /bin/kernel_debugger and with Alt-Sysreq-D. (I can interact with the kernel debugger during boot without problem.)

comment:9 by diver, 3 years ago

In this case try to blacklist usb_keyboard kernel add-on in the bootloader and try again.

comment:10 by diver, 3 years ago

Although, if you can interact with KDL during boot that could be enough to get ints output.

comment:11 by jens, 3 years ago

"ints" during boot:

KERN: kdebug> intsint 219, enabled 1, handled        0, unhandled        0
KERN:    kernel_x86_64:_ZL20apic_timer_interruptPv  (0xffffffff80165780), data 0x0000000000000000, handled        0
KERN: 
KERN: int 221, enabled 1, handled        0, unhandled        0
KERN:    kernel_x86_64:_ZL17x86_ici_interruptPv     (0xffffffff8015dfe0), data 0x0000000000000000, handled        0
KERN: 
KERN: int 222, enabled 1, handled        0, unhandled        0
KERN:    kernel_x86_64:_ZL23x86_smp_error_interruptPv (0xffffffff8015e000), data 0x0000000000000000, handled        0
KERN: 
KERN: int 223, enabled 1, handled        0, unhandled        0
KERN:    kernel_x86_64:_ZL22x86_spurious_interruptPv (0xffffffff8015dfd0), data 0x0000000000000000, handled        0
KERN: 
KERN: kdebug> coACPI: Enabled 13 GPEs in block 00 to 3F

Do you have the path to usb_keyboard? I dug around in the menues a bit, but I am not familiar with the OS architecture. I found the usb_hid driver, but that disabled all input. The hardware doesn't have a legacy PS/2 connector, so I can't try that.

comment:12 by diver, 3 years ago

It shows 0 unhandled interrupts, probably this is to early.

query usb_keyboard
/system/add-ons/kernel/debugger/usb_keyboard

Last edited 3 years ago by diver (previous) (diff)

comment:13 by jens, 3 years ago

With usb_keyboard disabled I get the debugger startup message, but all input freezes. As far as I can see there is no legacy PS/2 emulation option in the bios.

I could try a serial terminal if that helps, but I'll need to get an appropriate cable.

Or can the kernel debugger execute commands from a file?

follow-up: 15 comment:14 by diver, 3 years ago

With usb_keyboard disabled I get the debugger startup message, but all input freezes.

Did you invoke KDL with kernel_debugger or with Alt-SysReq-D?

I could try a serial terminal if that helps

This should help, yes.

Or can the kernel debugger execute commands from a file?

It can't but this sounds like a handy feature to have it it's possible.

in reply to: 14 comment:15 by jens, 3 years ago

Replying to diver:

With usb_keyboard disabled I get the debugger startup message, but all input freezes.

Did you invoke KDL with kernel_debugger or with Alt-SysReq-D?

I used /bin/kernel_debugger.

comment:16 by jens, 3 years ago

Ok, with a serial cable attached I was able to do "ints":

kdebug> ints       
int   1, enabled 1, handled        1, unhandled        1
   ps2:_ZL13ps2_interruptPv                   (0xffffffff81a35900), data 0x0000000000000000, handled        1

int   2, enabled 0, handled        0, unhandled        0
   kernel_x86_64:_ZL30ioapic_source_override_handlerPv (0xffffffff801629b0), data 0x0000000000000000, handled        0

int   9, enabled 1, handled        0, unhandled        0
   acpi:AcpiEvSciXruptHandler                 (0xffffffff814c00e0), data 0xffffffff82279ac0, handled        0

int  12, enabled 1, handled        1, unhandled        0
   ps2:_ZL13ps2_interruptPv                   (0xffffffff81a35900), data 0x0000000000000000, handled        1

int  16, enabled 3, handled        0, unhandled 33534553
   ehci:_ZN4EHCI16InterruptHandlerEPv         (0xffffffff81906200), data 0xffffffff8260ce00, handled        0
   uhci:_ZN4UHCI16InterruptHandlerEPv         (0xffffffff81948670), data 0xffffffff824fd600, handled        0
   uhci:_ZN4UHCI16InterruptHandlerEPv         (0xffffffff81948670), data 0xffffffff824fdc00, handled        0

int  17, enabled 2, handled        0, unhandled        0
   uhci:_ZN4UHCI16InterruptHandlerEPv         (0xffffffff81948670), data 0xffffffff824fd400, handled        0
   uhci:_ZN4UHCI16InterruptHandlerEPv         (0xffffffff81948670), data 0xffffffff824fda00, handled        0

int  18, enabled 5, handled      680, unhandled        0
   ata_adapter:_ZL19ata_adapter_inthandPv     (0xffffffff81512d90), data 0xffffffff82604340, handled        0
   ata_adapter:_ZL19ata_adapter_inthandPv     (0xffffffff81512d90), data 0xffffffff82604390, handled        0
   ehci:_ZN4EHCI16InterruptHandlerEPv         (0xffffffff81906200), data 0xffffffff824fd000, handled        0
   uhci:_ZN4UHCI16InterruptHandlerEPv         (0xffffffff81948670), data 0xffffffff824fd200, handled      680
   uhci:_ZN4UHCI16InterruptHandlerEPv         (0xffffffff81948670), data 0xffffffff824fd800, handled        0

int  24, enabled 1, handled     9572, unhandled        0
   ahci:_ZN14AHCIController9InterruptEPv      (0xffffffff814fcf30), data 0xffffffff82269900, handled     9572

int  25, enabled 1, handled    13800, unhandled        0
   intel_extreme:_ZL23intel_interrupt_handlerPv (0xffffffff81659160), data 0xffffffff8249ed90, handled    13800

int  26, enabled 1, handled      225, unhandled        0
   ipro1000:iflib_fast_intr_rxtx              (0xffffffff8a73fe20), data 0xffffffff822bfca0, handled      225

int  27, enabled 1, handled     7355, unhandled        1
   hda:_ZL21hda_interrupt_handlerP14hda_controller (0xffffffff81ac35c0), data 0xffffffff81acc280, handled     7355

int 219, enabled 1, handled   110716, unhandled        0
   kernel_x86_64:_ZL20apic_timer_interruptPv  (0xffffffff80165780), data 0x0000000000000000, handled   110716

int 221, enabled 1, handled    55126, unhandled        0
   kernel_x86_64:_ZL17x86_ici_interruptPv     (0xffffffff8015dfe0), data 0x0000000000000000, handled    55126

int 222, enabled 1, handled        0, unhandled        0
   kernel_x86_64:_ZL23x86_smp_error_interruptPv (0xffffffff8015e000), data 0x0000000000000000, handled        0

int 223, enabled 1, handled        0, unhandled        0
   kernel_x86_64:_ZL22x86_spurious_interruptPv (0xffffffff8015dfd0), data 0x0000000000000000, handled        0

This is after a "ping google" "curl google".

Version 0, edited 3 years ago by jens (next)

follow-up: 25 comment:17 by diver, 3 years ago

So I guess it could be an usb related interrupt storm:

int  16, enabled 3, handled        0, unhandled 71138001
   ehci:_ZN4EHCI16InterruptHandlerEPv         (0xffffffff81906200), data 0xffffffff8260ce00, handled        0
   uhci:_ZN4UHCI16InterruptHandlerEPv         (0xffffffff81948670), data 0xffffffff824fd600, handled        0
   uhci:_ZN4UHCI16InterruptHandlerEPv         (0xffffffff81948670), data 0xffffffff824fdc00, handled        0

You can try to blacklist ehci and uhci (or both) drivers and see if this changes anything.

comment:18 by Coldfirex, 3 years ago

After blacklisting maybe you could also check for bios/firmware updates as a long shot (even though Debian works).

follow-up: 20 comment:19 by jens, 3 years ago

blacklisting ehci: no difference

blacklisting uhci: no mouse control, so can't launch programs

kdebug> ints
int   1, enabled 1, handled       60, unhandled        0, ACTIVE
   ps2:_ZL13ps2_interruptPv                   (0xffffffff81b39900), data 0x0000000000000000, handled       60

int   2, enabled 0, handled        0, unhandled        0
   kernel_x86_64:_ZL30ioapic_source_override_handlerPv (0xffffffff801629b0), data 0x0000000000000000, handled        0

int   9, enabled 1, handled        0, unhandled        0
   acpi:AcpiEvSciXruptHandler                 (0xffffffff814c00e0), data 0xffffffff82272ac0, handled        0

int  12, enabled 1, handled     2466, unhandled        0
   ps2:_ZL13ps2_interruptPv                   (0xffffffff81b39900), data 0x0000000000000000, handled     2466

int  16, enabled -100, handled        0, unhandled    10001
   ehci:_ZN4EHCI16InterruptHandlerEPv         (0xffffffff81906200), data 0xffffffff82262800, handled        0

int  18, enabled 3, handled        0, unhandled        0
   ata_adapter:_ZL19ata_adapter_inthandPv     (0xffffffff81512d90), data 0xffffffff82600de0, handled        0
   ata_adapter:_ZL19ata_adapter_inthandPv     (0xffffffff81512d90), data 0xffffffff82600e30, handled        0
   ehci:_ZN4EHCI16InterruptHandlerEPv         (0xffffffff81906200), data 0xffffffff82262a00, handled        0

int  24, enabled 1, handled     9015, unhandled        0
   ahci:_ZN14AHCIController9InterruptEPv      (0xffffffff814fcf30), data 0xffffffff82261900, handled     9015

int  25, enabled 1, handled     6427, unhandled        0
   intel_extreme:_ZL23intel_interrupt_handlerPv (0xffffffff8198f160), data 0xffffffff8b4dc708, handled     6427

int  26, enabled 1, handled       67, unhandled        0
   ipro1000:iflib_fast_intr_rxtx              (0xffffffff8a73fe20), data 0xffffffff822b34a0, handled       67

int  27, enabled 1, handled     3538, unhandled        0
   hda:_ZL21hda_interrupt_handlerP14hda_controller (0xffffffff8a7d15c0), data 0xffffffff8a7da280, handled     3538

int 219, enabled 1, handled    52076, unhandled        0
   kernel_x86_64:_ZL20apic_timer_interruptPv  (0xffffffff80165780), data 0x0000000000000000, handled    52076

int 221, enabled 1, handled    40184, unhandled        0
   kernel_x86_64:_ZL17x86_ici_interruptPv     (0xffffffff8015dfe0), data 0x0000000000000000, handled    40184

int 222, enabled 1, handled        0, unhandled        0
   kernel_x86_64:_ZL23x86_smp_error_interruptPv (0xffffffff8015e000), data 0x0000000000000000, handled        0

int 223, enabled 1, handled        0, unhandled        0
   kernel_x86_64:_ZL22x86_spurious_interruptPv (0xffffffff8015dfd0), data 0x0000000000000000, handled        0

There may be a bios update, but I have to work out what version I have right now, and how I can write it to a floppy ... if I even have a floppy somewhere.

in reply to: 19 ; follow-up: 26 comment:20 by diver, 3 years ago

You can try to setup openssh access and blacklist uhci driver.

comment:21 by jens, 3 years ago

Made a freedos usb drive and flashed the latest bios from Lenovo's website, but get no difference.

comment:22 by jens, 3 years ago

I considered that, wouldn't that run into network problems as well? I'll try tomorrow.

comment:23 by diver, 3 years ago

If ehci or uhci drivers are the cause (and you blacklisted them) you shouldn't run into network problems hopefully.

Last edited 3 years ago by diver (previous) (diff)

comment:24 by diver, 3 years ago

Cc:	mmlr added

in reply to: 17 comment:25 by mmlr, 3 years ago

Replying to diver:

So I guess it could be an usb related interrupt storm:

int  16, enabled 3, handled        0, unhandled 71138001
   ehci:_ZN4EHCI16InterruptHandlerEPv         (0xffffffff81906200), data 0xffffffff8260ce00, handled        0
   uhci:_ZN4UHCI16InterruptHandlerEPv         (0xffffffff81948670), data 0xffffffff824fd600, handled        0
   uhci:_ZN4UHCI16InterruptHandlerEPv         (0xffffffff81948670), data 0xffffffff824fdc00, handled        0

You can try to blacklist ehci and uhci (or both) drivers and see if this changes anything.

Note that the global interrupt 16 is shared between PCI device 0:25 (the network controller) and 0:26 (the USB controllers). Given the context, I'd say the problem is with the network controller.

The driver attaches relatively late and then switches interrupts to MSI 26, where we see the handler in the ints output with some handled interrupts.

It looks to me like there are interrupts happening during boot which go unhandled while the driver is not yet attached and they may just stop after that. Can get the output of ints a couple of times, continuing each time and using the network? Just to see if the unhandled interrupts actually continue to increase after the driver switched to MSI.

Turning off network booting in the firmware might work around the problem as that might leave the network controller uninitialized.

If it isn't an interrupt issue, then the original problem description sounds a lot like an MTU issue. Can you try reducing the MTU with ifconfig /dev/net/... mtu 1400 and see if that makes a difference?

in reply to: 20 comment:26 by jens, 3 years ago

Replying to diver:

You can try to setup openssh access and blacklist uhci driver.

Ok, configured sshd, blacklisted uhci, logged in with ssh, did a 'curl google.com'. First one took a long time but succeeded, second one timed out.

opened debugger, ints:

int  16, enabled -100, handled        0, unhandled    10001
   ehci:_ZN4EHCI16InterruptHandlerEPv         (0xffffffff81906200), data 0xffffffff82262800, handled        0

another curl, timed out, ints:

int  16, enabled -100, handled        0, unhandled    10001
   ehci:_ZN4EHCI16InterruptHandlerEPv         (0xffffffff81906200), data 0xffffffff82262800, handled        0

(so no additional interrupts?)

another curl, another ints:

int  16, enabled -100, handled        0, unhandled    10001
   ehci:_ZN4EHCI16InterruptHandlerEPv         (0xffffffff81906200), data 0xffffffff82262800, handled        0

Disabled net-boot in the BIOS (if you mean that), booted normally, curl:

int  16, enabled 3, handled        0, unhandled 40843059
   ehci:_ZN4EHCI16InterruptHandlerEPv         (0xffffffff81906200), data 0xffffffff8260de00, handled        0
   uhci:_ZN4UHCI16InterruptHandlerEPv         (0xffffffff81948670), data 0xffffffff824fd600, handled        0
   uhci:_ZN4UHCI16InterruptHandlerEPv         (0xffffffff81948670), data 0xffffffff824fdc00, handled        0

another curl

int  16, enabled 3, handled        0, unhandled 72871017
   ehci:_ZN4EHCI16InterruptHandlerEPv         (0xffffffff81906200), data 0xffffffff8260de00, handled        0
   uhci:_ZN4UHCI16InterruptHandlerEPv         (0xffffffff81948670), data 0xffffffff824fd600, handled        0
   uhci:_ZN4UHCI16InterruptHandlerEPv         (0xffffffff81948670), data 0xffffffff824fdc00, handled        0

Last edited 3 years ago by jens (previous) (diff)

comment:27 by jens, 3 years ago

Disabled both ehci and uhci, same problem, ints:

kdebug> ints
int   1, enabled 1, handled       25, unhandled        0, ACTIVE
   ps2:_ZL13ps2_interruptPv                   (0xffffffff81a39900), data 0x0000000000000000, handled       25

int   2, enabled 0, handled        0, unhandled        0
   kernel_x86_64:_ZL30ioapic_source_override_handlerPv (0xffffffff801629b0), data 0x0000000000000000, handled        0

int   9, enabled 1, handled        0, unhandled        0
   acpi:AcpiEvSciXruptHandler                 (0xffffffff814c00e0), data 0xffffffff8226aac0, handled        0

int  12, enabled 1, handled      267, unhandled        0
   ps2:_ZL13ps2_interruptPv                   (0xffffffff81a39900), data 0x0000000000000000, handled      267

int  18, enabled 2, handled        0, unhandled        0
   ata_adapter:_ZL19ata_adapter_inthandPv     (0xffffffff81512d90), data 0xffffffff824e5ed0, handled        0
   ata_adapter:_ZL19ata_adapter_inthandPv     (0xffffffff81512d90), data 0xffffffff824e5f20, handled        0

int  24, enabled 1, handled     9065, unhandled        0
   ahci:_ZN14AHCIController9InterruptEPv      (0xffffffff814fcf30), data 0xffffffff82259900, handled     9065

int  25, enabled 1, handled     5783, unhandled        0
   intel_extreme:_ZL23intel_interrupt_handlerPv (0xffffffff81659160), data 0xffffffff8ac62d98, handled     5783

int  26, enabled 1, handled      376, unhandled        0
   ipro1000:iflib_fast_intr_rxtx              (0xffffffff89d3de20), data 0xffffffff822b48a0, handled      376

int  27, enabled 1, handled     3196, unhandled        0
   hda:_ZL21hda_interrupt_handlerP14hda_controller (0xffffffff811425c0), data 0xffffffff8114b280, handled     3196

int 219, enabled 1, handled    40345, unhandled        0
   kernel_x86_64:_ZL20apic_timer_interruptPv  (0xffffffff80165780), data 0x0000000000000000, handled    40345

int 221, enabled 1, handled    37399, unhandled        0
   kernel_x86_64:_ZL17x86_ici_interruptPv     (0xffffffff8015dfe0), data 0x0000000000000000, handled    37399

int 222, enabled 1, handled        0, unhandled        0
   kernel_x86_64:_ZL23x86_smp_error_interruptPv (0xffffffff8015e000), data 0x0000000000000000, handled        0

int 223, enabled 1, handled        0, unhandled        0
   kernel_x86_64:_ZL22x86_spurious_interruptPv (0xffffffff8015dfd0), data 0x0000000000000000, handled        0

comment:28 by diver, 3 years ago

IIRC turning off ACPI in the bootloader also turns off MSI. See if that changes anything.

comment:29 by jens, 3 years ago

That doesn't boot past the startup screen. All the icons light up, but nothing after the last one. last few lines of the serial console:

package_daemon [14313807:   119] active package: "mesa_devel-17.1.10-6-x86_64.hpkg"
package_daemon [14321163:   119] active package: "libpcre-8.44-1-x86_64.hpkg"
package_daemon [14328036:   119] active package: "lcms-2.12-1-x86_64.hpkg"
package_daemon [14334578:   119] active package: "git-2.30.2-2-x86_64.hpkg"
package_daemon [14341289:   119] active package: "curl-7.76.1-1-x86_64.hpkg"
package_daemon [14347999:   119] The latest volume state is also the currently active one
package_daemon [14355925:   119] Volume::InitialVerify((nil), (nil))
package_daemon [14418876:   119] More than 99% interrupts of vector 11 are unhandled
Volume::InitialVerify(): volume at "/boot/system" is consistent
package_daemon [14432645:   119] Failed to open packages activation file /boot/home/config/packages/administrative/activated-packages: No such file or directory
package_daemon [14446518:   119] Failed to get activated packages info from activated packages file. Assuming all package files in package directory are activated.
package_daemon [14460840:   119] latest volume state:
package_daemon [14465552:   119] The latest volume state is also the currently active one
package_daemon [14473463:   119] Volume::InitialVerify(0x120a619b5c20, (nil))
package_daemon [14483358:   119] Volume::InitialVerify(): volume at "/boot/home/config" is consistent
More than 99% interrupts of vector 11 are unhandled

Interestingly I don't have the NMI from #4555 during startup.

comment:30 by mmlr, 3 years ago

The one where the unhandled interrupts don't increase only stopped because the interrupt vector is disabled as it is not shared by multiple drivers anymore. In the other trace it clearly still increases.

Can you dump the PCI info in KDL as well to check what the interrupt status of the network controller is?

Did you also try the MTU setting?

comment:31 by jens, 3 years ago

Tried the mtu setting this morning, no difference.

Do you mean this?

kdebug> pcistatus
domain 0, bus 0, dev  0, func 0, PCI device status 0x3090
  Received Master-Abort
  Received Target-Abort
domain 0, bus 0, dev  2, func 0, PCI device status 0x0090
domain 0, bus 0, dev  2, func 1, PCI device status 0x0090
domain 0, bus 0, dev  3, func 0, PCI device status 0x0018
domain 0, bus 0, dev  3, func 2, PCI device status 0x00b0
domain 0, bus 0, dev  3, func 3, PCI device status 0x00b0
domain 0, bus 0, dev 25, func 0, PCI device status 0x0018
domain 0, bus 0, dev 26, func 0, PCI device status 0x0290
domain 0, bus 0, dev 26, func 1, PCI device status 0x0290
domain 0, bus 0, dev 26, func 2, PCI device status 0x0290
domain 0, bus 0, dev 26, func 7, PCI device status 0x0290
domain 0, bus 0, dev 27, func 0, PCI device status 0x0010
domain 0, bus 0, dev 29, func 0, PCI device status 0x0290
domain 0, bus 0, dev 29, func 1, PCI device status 0x0290
domain 0, bus 0, dev 29, func 2, PCI device status 0x0290
domain 0, bus 0, dev 29, func 7, PCI device status 0x0290
domain 0, bus 0, dev 30, func 0, PCI device status 0x4810
  Signalled System Error
  Signalled Target-Abort
domain 0, bus 0, dev 30, func 0, PCI bridge secondary status 0x2280
  Received Master-Abort
domain 0, bus 0, dev 30, func 0, PCI bridge control 0x0827
domain 0, bus 0, dev 31, func 0, PCI device status 0x0210
domain 0, bus 0, dev 31, func 2, PCI device status 0x02b0
domain 0, bus 0, dev 31, func 3, PCI device status 0x0280
kdebug> pcirefresh
PCI: [dom 0, bus  0] bus   0, device  0, function  0: vendor 8086, device 2e10, revision 03
KERN: PCI:   class_base 06, class_function 00, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 2e10: 4 Series Chipset DRAM Controller
KERN: PCI:   info: Bridge (Host bridge)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 3048, subsystem_vendor_id 17aa
KERN: PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: vendspec
KERN: PCI: [dom 0, bus  0] bus   0, device  2, function  0: vendor 8086, device 2e12, revision 03
KERN: PCI:   class_base 03, class_function 00, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 2e12: 4 Series Chipset Integrated Graphics Controller (ThinkCentre M6258)
KERN: PCI:   info: Display controller (VGA compatible controller, VGA controller)
KERN: PCI:   line_size 00, latency 00, header_type 80, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 3048, subsystem_vendor_id 17aa
KERN: PCI:   interrupt_line 10, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host fc000000, pci fc000000, size 00400000, flags 04
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host e0000000, pci e0000000, size 10000000, flags 0c
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00001c70, pci 00001c70, size 00000008, flags 01
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: MSI, PM
KERN: PCI: [dom 0, bus  0] bus   0, device  2, function  1: vendor 8086, device 2e13, revision 03
KERN: PCI:   class_base 03, class_function 80, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 2e13: 4 Series Chipset Integrated Graphics Controller
KERN: PCI:   info: Display controller
KERN: PCI:   line_size 00, latency 00, header_type 80, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 3048, subsystem_vendor_id 17aa
KERN: PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host fc400000, pci fc400000, size 00100000, flags 04
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PM
KERN: PCI: [dom 0, bus  0] bus   0, device  3, function  0: vendor 8086, device 2e14, revision 03
KERN: PCI:   class_base 07, class_function 80, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 2e14: 4 Series Chipset HECI Controller
KERN: PCI:   info: Communication controller
KERN: PCI:   line_size 00, latency 00, header_type 80, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 3048, subsystem_vendor_id 17aa
KERN: PCI:   interrupt_line 10, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host fc524000, pci fc524000, size 00000010, flags 04
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PM, MSI
KERN: PCI: [dom 0, bus  0] bus   0, device  3, function  2: vendor 8086, device 2e16, revision 03
KERN: PCI:   class_base 01, class_function 01, class_api 85
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 2e16: 4 Series Chipset PT IDER Controller
KERN: PCI:   info: Mass storage controller (IDE interface, PCI native mode-only co
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 3048, subsystem_vendor_id 17aa
KERN: PCI:   interrupt_line 12, interrupt_pin 03, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00001c88, pci 00001c88, size 00000008, flags 01
KERN: PCI:   base reg 1: host 00001c7c, pci 00001c7c, size 00000004, flags 01
KERN: PCI:   base reg 2: host 00001c80, pci 00001c80, size 00000008, flags 01
KERN: PCI:   base reg 3: host 00001c78, pci 00001c78, size 00000004, flags 01
KERN: PCI:   base reg 4: host 00001c40, pci 00001c40, size 00000010, flags 01
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PM, MSI
KERN: PCI: [dom 0, bus  0] bus   0, device  3, function  3: vendor 8086, device 2e17, revision 03
KERN: PCI:   class_base 07, class_function 00, class_api 02
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 2e17: 4 Series Chipset Serial KT Controller
KERN: PCI:   info: Communication controller (Serial controller, 16550)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 3048, subsystem_vendor_id 17aa
KERN: PCI:   interrupt_line 11, interrupt_pin 02, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00001c90, pci 00001c90, size 00000008, flags 01
KERN: PCI:   base reg 1: host fc526000, pci fc526000, size 00001000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PM, MSI
KERN: PCI: [dom 0, bus  0] bus   0, device 25, function  0: vendor 8086, device 10de, revision 02
KERN: PCI:   class_base 02, class_function 00, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 10de: 82567LM-3 Gigabit Network Connection
KERN: PCI:   info: Network controller (Ethernet controller)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 3048, subsystem_vendor_id 17aa
KERN: PCI:   interrupt_line 10, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host fc500000, pci fc500000, size 00020000, flags 00
KERN: PCI:   base reg 1: host fc527000, pci fc527000, size 00001000, flags 00
KERN: PCI:   base reg 2: host 00001820, pci 00001820, size 00000020, flags 01
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pcKERN: i 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PM, MSI, AdvancedFeatures
KERN: PCI: [dom 0, bus  0] bus   0, device 26, function  0: vendor 8086, device 3a67, revision 02
KERN: PCI:   class_base 0c, class_function 03, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 3a67: 82801JD/DO (ICH10 Family) USB UHCI Controller #4
KERN: PCI:   info: Serial bus controller (USB controller, UHCI)
KERN: PCI:   line_size 00, latency 00, header_type 80, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 3048, subsystem_vendor_id 17aa
KERN: PCI:   interrupt_line 10, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00001840, pci 00001840, size 00000020, flags 01
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: AdvancedFeatures
KERN: PCI: [dom 0, bus  0] bus   0, device 26, function  1: vendor 8086, device 3a68, revision 02
KERN: PCI:   class_base 0c, class_function 03, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 3a68: 82801JD/DO (ICH10 Family) USB UHCI Controller #5
KERN: PCI:   info: Serial bus controller (USB controller, UHCI)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 3048, subsystem_vendor_id 17aa
KERN: PCI:   interrupt_line 11, interrupt_pin 02, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00001860, pci 00001860, size 00000020, flags 01
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: AdvancedFeatures
KERN: PCI: [dom 0, bus  0] bus   0, device 26, function  2: vendor 8086, device 3a69, revision 02
KERN: PCI:   class_base 0c, class_function 03, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 3a69: 82801JD/DO (ICH10 Family) USB UHCI Controller #6
KERN: PCI:   info: Serial bus controller (USB controller, UHCI)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 3048, subsystem_vendor_id 17aa
KERN: PCI:   interrupt_line 12, interrupt_pin 03, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00001880, pci 00001880, size 00000020, flags 01
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: AdvancedFeatures
KERN: PCI: [dom 0, bus  0] bus   0, device 26, function  7: vendor 8086, device 3a6c, revision 02
KERN: PCI:   class_base 0c, class_function 03, class_api 20
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 3a6c: 82801JD/DO (ICH10 Family) USB2 EHCI Controller #2
KERN: PCI:   info: Serial bus controller (USB controller, EHCI)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 3048, subsystem_vendor_id 17aa
KERN: PCI:   interrupt_line 12, interrupt_pin 03, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host fc528000, pci fc528000, size 00000400, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PM, DebugPort, AdvancedFeatures
KERN: PCI: [dom 0, bus  0] bus   0, device 27, function  0: vendor 8086, device 3a6e, revision 02
KERN: PCI:   class_base 04, class_function 03, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 3a6e: 82801JD/DO (ICH10 Family) HD Audio Controller
KERN: PCI:   info: Multimedia controller (Audio device)
KERN: PCI:   line_size 08, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 3048, subsystem_vendor_id 17aa
KERN: PCI:   interrupt_line 10, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host fc520000, pci fc520000, size 00004000, flags 04
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PM, MSI, PCIe
KERN: PCI:   Extended capabilities: Virtual Channel, Root Complex Link Declaration
KERN: PCI: [dom 0, bus  0] bus   0, device 29, function  0: vendor 8086, device 3a64, revision 02
KERN: PCI:   class_base 0c, class_function 03, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 3a64: 82801JD/DO (ICH10 Family) USB UHCI Controller #1
KERN: PCI:   info: Serial bus controller (USB controller, UHCI)
KERN: PCI:   line_size 00, latency 00, header_type 80, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 3048, subsystem_vendor_id 17aa
KERN: PCI:   interrupt_line 10, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 000018a0, pci 000018a0, size 00000020, flags 01
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: AdvancedFeatures
KERN: PCI: [dom 0, bus  0] bus   0, device 29, function  1: vendor 8086, device 3a65, revision 02
KERN: PCI:   class_base 0c, class_function 03, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 3a65: 82801JD/DO (ICH10 Family) USB UHCI Controller #2
KERN: PCI:   info: Serial bus controller (USB controller, UHCI)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 3048, subsystem_vendor_id 17aa
KERN: PCI:   interrupt_line 11, interrupt_pin 02, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 000018c0, pci 000018c0, size 00000020, flags 01
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: AdvancedFeatures
KERN: PCI: [dom 0, bus  0] bus   0, device 29, function  2: vendor 8086, device 3a66, revision 02
KERN: PCI:   class_base 0c, class_function 03, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 3a66: 82801JD/DO (ICH10 Family) USB UHCI Controller #3
KERN: PCI:   info: Serial bus controller (USB controller, UHCI)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 3048, subsystem_vendor_id 17aa
KERN: PCI:   interrupt_line 12, interrupt_pin 03, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 0000KERN: 0000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 000018e0, pci 000018e0, size 00000020, flags 01
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: AdvancedFeatures
KERN: PCI: [dom 0, bus  0] bus   0, device 29, function  7: vendor 8086, device 3a6a, revision 02
KERN: PCI:   class_base 0c, class_function 03, class_api 20
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 3a6a: 82801JD/DO (ICH10 Family) USB2 EHCI Controller #1
KERN: PCI:   info: Serial bus controller (USB controller, EHCI)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 3048, subsystem_vendor_id 17aa
KERN: PCI:   interrupt_line 10, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host fc529000, pci fc529000, size 00000400, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PM, DebugPort, AdvancedFeatures
KERN: PCI: [dom 0, bus  0] bus   0, device 30, function  0: vendor 8086, device 244e, revision a2
KERN: PCI:   class_base 06, class_function 04, class_api 01
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 244e: 82801 PCI Bridge
KERN: PCI:   info: Bridge (PCI bridge, Subtractive decode)
KERN: PCI:   line_size 00, latency 00, header_type 01, BIST 00
KERN: PCI:   subsystem_id 0000, subsystem_vendor_id 0050
KERN: PCI:   primary_bus 00, secondary_bus 11, subordinate_bus 11, secondary_latency 20
KERN: PCI:   I/O window f000-0fff
KERN: PCI:   memory window fff00000-000fffff
KERN: PCI:   prefetchable memory window 00000000fff00000-00000000000fffff
KERN: PCI:   bridge_control 0827, secondary_status 0280
KERN: PCI:   interrupt_line ff, interrupt_pin 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size ??
KERN: PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: subvendor
KERN: PCI: [dom 0, bus  0] bus   0, device 31, function  0: vendor 8086, device 3a14, revision 02
KERN: PCI:   class_base 06, class_function 01, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 3a14: 82801JDO (ICH10DO) LPC Interface Controller
KERN: PCI:   info: Bridge (ISA bridge)
KERN: PCI:   line_size 00, latency 00, header_type 80, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 3048, subsystem_vendor_id 17aa
KERN: PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: vendspec
KERN: PCI: [dom 0, bus  0] bus   0, device 31, function  2: vendor 8086, device 3a02, revision 02
KERN: PCI:   class_base 01, class_function 06, class_api 01
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 3a02: 82801JD/DO (ICH10 Family) SATA AHCI Controller
KERN: PCI:   info: Mass storage controller (SATA controller, AHCI 1.0)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 3048, subsystem_vendor_id 17aa
KERN: PCI:   interrupt_line 11, interrupt_pin 02, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00001ca8, pci 00001ca8, size 00000008, flags 01
KERN: PCI:   base reg 1: host 00001c9c, pci 00001c9c, size 00000004, flags 01
KERN: PCI:   base reg 2: host 00001ca0, pci 00001ca0, size 00000008, flags 01
KERN: PCI:   base reg 3: host 00001c98, pci 00001c98, size 00000004, flags 01
KERN: PCI:   base reg 4: host 00001c00, pci 00001c00, size 00000020, flags 01
KERN: PCI:   base reg 5: host fc52a000, pci fc52a000, size 00000800, flags 00
KERN: PCI:   Capabilities: MSI, PM, SATA, AdvancedFeatures
KERN: PCI: [dom 0, bus  0] bus   0, device 31, function  3: vendor 8086, device 3a60, revision 02
KERN: PCI:   class_base 0c, class_function 05, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 3a60: 82801JD/DO (ICH10 Family) SMBus Controller
KERN: PCI:   info: Serial bus controller (SMBus)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 3048, subsystem_vendor_id 17aa
KERN: PCI:   interrupt_line 11, interrupt_pin 02, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host fc52b000, pci fc52b000, size 00000100, flags 04
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00001c20, pci 00001c20, size 00000020, flags 01
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: (not supported)
KERN: kdebug> co

comment:32 by waddlesplash, 2 years ago

Please retest with a recent nightly (hrev56139+).

comment:33 by jens, 19 months ago

Sorry, I completely forgot about this... I found some time to test Version: R1/beta4 Release date: December 23, 2022, and I'm able to surf the web.

comment:34 by waddlesplash, 19 months ago

Resolution:	→ fixed
Status:	new → closed

Thanks for testing!

Note: See TracTickets for help on using tickets.

Download in other formats: