#2779 closed bug (fixed)
Unable to boot from USB - fxp intr
| Reported by: | emitrax | Owned by: | axeld |
|---|---|---|---|
| Priority: | normal | Milestone: | R1 |
| Component: | Drivers/Network/ipro100 | Version: | R1/pre-alpha1 |
| Keywords: | Cc: | ||
| Blocked By: | Blocking: | ||
| Platform: | All |
Description
I'm unable to boot from USB.
A part from the fact that I had to try with different stick before booting (weird thing perhpas, but the same procedure on some stick resulted in a "Failed to load OS" error, any idea?), when finally managed to boot it, it hangs on the last icon due to the "fxp intr" thread that keep running eating all the CPU. The system just sit there and doesn't go any further. The driver is the pro100.
Change History (8)
comment:1 by , 15 years ago
comment:2 by , 13 years ago
Ping. The ipro100 driver was updated. Please check with any revision after hrev41908.
comment:3 by , 13 years ago
| Component: | Drivers/Network → Drivers/Network/ipro100 |
|---|
comment:4 by , 13 years ago
| Blocking: | 7665 added |
|---|
comment:5 by , 10 years ago
I am unable to reproduce this error on hrev48487.
On my first test, I built from a USB without any issues. I suggest closing this issue.
comment:6 by , 10 years ago
| Resolution: | → fixed |
|---|---|
| Status: | new → closed |
no responce after 5 years. Closing as probably fixed
comment:7 by , 10 years ago
Unless you tested it with an ipro100 card you can't really say if the driver is buggy or not, since it won't be used. VirtualBox emulates ipro1000 but not ipro100 it seems.
comment:8 by , 6 years ago
| Blocking: | 7665 removed |
|---|
Ping. Can you try this again with a fresh build of Haiku, and provide details on the hardware that it's not working on, if that is still the case.