Opened 15 years ago
Last modified 6 weeks ago
#4389 new bug
USB flash device on 82801G/ICH7-M not recognized, ehci error 0x00088d40
Reported by: | zaunpfahl | Owned by: | mmlr |
---|---|---|---|
Priority: | normal | Milestone: | R1 |
Component: | Drivers/USB/EHCI | Version: | R1/pre-alpha1 |
Keywords: | Cc: | ||
Blocked By: | Blocking: | ||
Platform: | x86 |
Description
Plug in SanDisk Cruzer Micro 8GB flash disk. Select "Mount", the popup freezes for a couple secs. Device ultimately not recognized. Worked flawless some weeks ago with the same hardware.
Attachments (1)
Change History (7)
by , 15 years ago
Attachment: | SanDiskCruzerMicro added |
---|
follow-up: 2 comment:1 by , 15 years ago
Can you please retry that with a revision >= hrev32863 and post an updated log if it still fails?
comment:2 by , 15 years ago
Replying to mmlr:
Can you please retry that with a revision >= hrev32863 and post an updated log if it still fails?
Raw devices now created with no error. This bug seems fixed.
But only the raw device is available. Partitions are neither seen nor does DriveSetup allow the partition table to be edited (options disabled). Don't know were against to file this.
follow-up: 4 comment:3 by , 15 years ago
Is the raw device accessible at all? You could try opening it with DiskProbe for example and see if you can view the contents.
comment:4 by , 15 years ago
Replying to mmlr:
Is the raw device accessible at all? You could try opening it with DiskProbe for example and see if you can view the contents.
Ah, interessting! DriveSetup shows device as size 0, while DiskProbe offers 0xef7fff blocks for reading no problem.
comment:5 by , 10 years ago
Component: | Drivers/USB → Drivers/USB/EHCI |
---|
Sorting out Drivers/USB/EHCI tickets from Drivers/USB.
syslog usb mount