Boot failed on old Mitac 6133 laptop...

[jedie]

Can't boot Haiku Alpha 1 on a old Laptop, hangs on:

usb uhci -1: register base:0x0000...

I have also try every "safe mode options"

Laptop data:

• manufacturer: Mitac 6133
• CPU: Celeron 400Mhz
• RAM: 160MB
• BIOS Version: R1.07

This Laptop also known as:

• Mitac MiNote 6133
• Fujitsu Siemens LiteLine 6133
• IPC Topnote 6133
• HPC NOTE 6133
• NetBook 6133
• Network 6133
• Notestar NP 6133

[jedie]

Screenshot of Debug Messages

[jedie]

the first lines of lspci output:

00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)

[jedie]

I have installed a linux and can get more info for you:

complete lspci:

00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:08.0 CardBus bridge: O2 Micro, Inc. OZ6812 CardBus Controller (rev 05)
00:09.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage LT Pro AGP-133 (rev dc)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

[jedie]

lshw output

[jedie]

I used the last BeOS PE from ​http://www.haikuware.com/directory/view-details/development/app-installation/beos-5-pe-max-edition

I can boot BeOS if i set "Don't call the BIOS" in the boot options.

[scottmc]

Can you recheck this with a recent Haiku build?

[jedie]

I tried alpah3, but i can't boot the "anyboot" CD because i get a "PANIC: Did not found any boot partitions!" This also happens if i activate all boot options...

EDIT: See also: https://dev.haiku-os.org/ticket/3486

EDIT2: I retry booting with any safe option on. Then i get the same error from initial ticket: """usb uhci -1: register base:0x00000000" Same with CD-Image instead of "anyboot"-CD...

[waddlesplash]

Filtering UHCI tickets from Drivers/USB to Drivers/USB/UHCI.

[waddlesplash]

Still an issue?

[waddlesplash]

No reply.

[nielx]

Remove milestone for tickets with status = closed and resolution != fixed