Boot problem with Shuttle X27D

[oxoocoffee]

I am trying to use latest build (haiku-r1a2-rc-hrev36674-x86gcc2hybrid-cd.zip) to boot on Suttle X27D (Intel Atom) and EPIA-CL10000. Below is a console trace when booting on Shuttle system. I tried to turn off all options in safe mode plus selecting console debugging and screen debugging. Below is only messages I see over serial connection before Shuttle reboots. Via board on the other end does not print anything over serial line (except printing to screen ...............) and rebooting. Pressing Shift during reboot does not enters safe mode. Interesting note is that initial Alpha1 boots just fine on Via board but I could not get it working on Shuttle board. Please let me know if there is anything I can do to help.

---

options = 0 APM version 1.2 available, flags 7. smp: using ACPI to detect MP configuration smp: local apic address is 0xfee00000 smp: found local APIC with id 0 smp: found local APIC with id 2 smp: found local APIC with id 3 smp: found local APIC with id 1 smp: found io APIC with id 4 and address 0xfec00000 VESA version = 3.0, capabilities 1 OEM string: Intel(r) 82945G Chipset Family Graphics Chip Accelerated VGA BIOS

160: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) 161: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) 162: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) 163: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) 164: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) 165: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) 166: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) 167: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) 168: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) 13c: 1920 x 1440 x 8 (a = 155, mem = 4, phy = d0000000, p = 1, b = 1) 14d: 1920 x 1440 x 16 (a = 155, mem = 6, phy = d0000000, p = 1, b = 1) 15c: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) 13a: 1600 x 1200 x 8 (a = 155, mem = 4, phy = d0000000, p = 1, b = 1) 14b: 1600 x 1200 x 16 (a = 155, mem = 6, phy = d0000000, p = 1, b = 1) 15a: 1600 x 1200 x 32 (a = 155, mem = 6, phy = d0000000, p = 1, b = 1) 107: 1280 x 1024 x 8 (a = 155, mem = 4, phy = d0000000, p = 1, b = 1) 11a: 1280 x 1024 x 16 (a = 155, mem = 6, phy = d0000000, p = 1, b = 1) 11b: 1280 x 1024 x 32 (a = 155, mem = 6, phy = d0000000, p = 1, b = 1) 105: 1024 x 768 x 8 (a = 155, mem = 4, phy = d0000000, p = 1, b = 1) 117: 1024 x 768 x 16 (a = 155, mem = 6, phy = d0000000, p = 1, b = 1) 118: 1024 x 768 x 32 (a = 155, mem = 6, phy = d0000000, p = 1, b = 1) 112: 640 x 480 x 32 (a = 155, mem = 6, phy = d0000000, p = 1, b = 1) 114: 800 x 600 x 16 (a = 155, mem = 6, phy = d0000000, p = 1, b = 1) 115: 800 x 600 x 32 (a = 155, mem = 6, phy = d0000000, p = 1, b = 1) 101: 640 x 480 x 8 (a = 155, mem = 4, phy = d0000000, p = 1, b = 1) 103: 800 x 600 x 8 (a = 155, mem = 4, phy = d0000000, p = 1, b = 1) 111: 640 x 480 x 16 (a = 155, mem = 6, phy = d0000000, p = 1, b = 1)

VESA compatible graphics! EDID1: 4f EDID2: ebx 102 EDID3: 4f Vendor: SAM Product ID: 693 Serial #: 1213542964 Produced in week/year: 15/2007 EDID version: 1.3 Type: Analog Size: 52 cm x 32 cm Gamma=2.6 White (X,Y)=(0.312,0.329) Supported Future Video Modes: 1600x1200@60Hz (id=16553) 1280x1024@60Hz (id=32897) 1280x960@60Hz (id=16513) 1152x864@75Hz (id=20337) Supported VESA Video Modes: 720x400@70Hz 640x480@60Hz 640x480@67Hz 640x480@72Hz 640x480@75Hz 800x600@56Hz 800x600@60Hz 800x600@72Hz 800x600@75Hz 832x624@75Hz 1024x768@60Hz 1024x768@70Hz 1024x768@75Hz 1280x1024@75Hz 1152x870@75Hz Additional Video Mode (1920x1200@59Hz): clock=154 MHz h: (1920, 1968, 2000, 2080) v: (1200, 1203, 1209, 1235) size: 51.8 cm x 32.4 cm border: 0 cm x 0 cm Horizontal frequency range = 30..81 kHz Vertical frequency range = 56..75 Hz Maximum pixel clock = 170 MHz Monitor Name: SyncMaster Serial Number: HVZP402545 Welcome to the Haiku boot loader! number of drives: 1 add_partitions_for(0x00105204, mountFS = no)

add_partitions_for(fd = 0, mountFS = no) 0x00105410 Partition::Partition 0x00105410 Partition::Scan() boot partition offset: 0 0x00105410 Partition::_Mount check for file_system: TAR Filesystem load kernel...

[oxoocoffee]

Trace for better viewing

[oxoocoffee]

luroh made build for me from gcc2, trunk, hrev36735 and still the same problem

[oxoocoffee]

Further testing shows that haiku-r1a2-rc-hrev36724-x86gcc2hybrid-raw.zip boots from USB stick just fine. But build from same day ISO fails to boot using USB CDROM.

Here is a full trace from haiku-r1a2-rc-hrev36724-x86gcc2hybrid-raw.zip USB stick. Please loo @ Good-Epia-haiku-r1a2-rc-hrev36674-x86gcc2hybrid-raw.txt at full trace

[oxoocoffee]

Shuttle X27D FAILS on all sampled builds starting from Jan 1 2010.

[kallisti5]

Is this still an issue on this device? I'm tempted to close since so much has changed in 6 years :-)