Opened 14 years ago
Closed 3 years ago
#6162 closed bug (no change required)
ScanIt application crashes
Reported by: | Meanwhile | Owned by: | nobody |
---|---|---|---|
Priority: | normal | Milestone: | R1 |
Component: | Drivers | Version: | R1/alpha2 |
Keywords: | Cc: | ||
Blocked By: | Blocking: | ||
Platform: | All |
Description
ScanIt installs fine and also produces a good pre-scan, but the actual scan leads to KDL (it did work fully on BeOS).
Scanner used -in both cases- is an Epson Perfection 610, connected through USB. Tested this on Haiku hrev36930.
Attachments (1)
Change History (5)
by , 14 years ago
Attachment: | ScanItcrash.jpg added |
---|
comment:1 by , 10 years ago
Component: | - General → Drivers |
---|
comment:3 by , 4 years ago
Since ScanIt is unmaintained, this was superceded by the recent Sanity 0.6-6 GUI update and sane_backends 1.0.30 with a completed driver for the Epson Perfection 610 scanner.
comment:4 by , 3 years ago
Resolution: | → no change required |
---|---|
Status: | new → closed |
Closing since BeOS drivers are not supported anymore.
Note:
See TracTickets
for help on using tickets.
The crash is in the driver for the scanner. The driver is included with Scan-It but is not open source: http://www.kabunkie.de/BeOS/ScanIt.html