Haiku wont boot no matter what on the following configuration.

[lxstoian]

As the title implies Haiku wont boot at all , no matter what boot options I choose : disable acpi , safe mode , etc. I have tried almost all variations.

This is the configuration of the machine :

Computer
Model : GigaByte GA-MA790XT-UD4P
Workgroup : WORKGROUP
Host Name : Alex-PC
User : Alex

Processor
Model : AMD Phenom(tm) II X6 1100T Processor
Speed : 3.72GHz
Cores per Processor : 6 Unit(s)
Type : Six-Core
Integrated Data Cache : 6x 64kB, Synchronous, Write-Back, 2-way, Exclusive, 64 byte line size
L2 Cache : 6x 512kB, ECC, Synchronous, Write-Back, 16-way, Exclusive, 64 byte line size
L3 Cache : 6MB, ECC, Synchronous, Write-Back, 48-way, 64 byte line size, 6 threads sharing

Computer
Mainboard : GigaByte GA-MA790XT-UD4P
BIOS : Award (OEM) F8g 07/12/2010
Bus(es) : ISA X-Bus PCI PCIe IMB USB FireWire/1394 i2c/SMBus
Multi-Processor (MP) Support : No
Multi-Processor Advanced PIC (APIC) : Yes
Total Memory : 4GB DIMM DDR3

Chipset
Model : ATI (AMD) RD780 GFX Dual Slot
Front Side Bus Speed : 2x 2GHz (4GHz)

Chipset
Model : AMD F10 Athlon 64/Opteron/Sempron HT Hub
Front Side Bus Speed : 2x 2GHz (4GHz)
Total Memory : 4GB DIMM DDR3
Channels : 2
Memory Bus Speed : 2x 670MHz (1.34GHz)

Memory Module(s)
Memory Module : Corsair CM3X2G1333C9DHX 2GB DIMM DDR3 PC3-10700U DDR3-1334 (9-9-9-24 5-34-10-5)
Memory Module : Corsair CM3X2G1333C9DHX 2GB DIMM DDR3 PC3-10700U DDR3-1334 (9-9-9-24 5-34-10-5)

Video System
Video Adapter : ATI Radeon HD 4800 Series (800 SM4.1 685MHz, 1GB DDR3 2GHz 256-bit, PCIe 2.00 x16)
Video Adapter : ATI Radeon HD 4800 Series (800 SM4.1 685MHz, 1GB DDR3 2GHz 256-bit, PCIe 2.00 x16)

Graphics Processor
OpenCL GP Processor : ATI Radeon HD 4800 Series (800SP 10C 685MHz, 512MB DDR3 2GHz 256-bit)
Compute Shader Processor : ATI Radeon HD 4800 Series (800SP 685MHz, 1GB DDR3 2GHz 256-bit)
STREAM GP Processor : ATI Radeon HD 4800 Series (800SP 10C 685MHz, 1GB DDR3 2GHz 256-bit)

Storage Devices
SAMSUNG HD322HJ (320.1GB, SATA300, 3.5", 7200rpm, 16MB Cache) : 298GB (B:)
Maxtor 6V320F0 (320.1GB, SATA300, 16MB Cache) : 298GB (C:) (D:)
SONY    DVD RW DRU-800A (ATA66, DVD+-RW, CD-RW, 2MB Cache) : N/A (E:)
Disk (, DVD+-R, CD-R, 512kB Cache) : N/A (F:)

Logical Storage Devices
Hard Disk (B:) : 298GB (NTFS) @ SAMSUNG HD322HJ (320.1GB, SATA300, 3.5", 7200rpm, 16MB Cache)
Hard Disk (C:) : 96GB (NTFS) @ Maxtor 6V320F0 (320.1GB, SATA300, 16MB Cache)
Hard Disk (D:) : 202GB (NTFS) @ Maxtor 6V320F0 (320.1GB, SATA300, 16MB Cache)
3.5" 1.44MB (A:) : N/A
Optical Drive (E:) : N/A @ SONY    DVD RW DRU-800A (ATA66, DVD+-RW, CD-RW, 2MB Cache)
Optical Drive (F:) : N/A @ Disk (, DVD+-R, CD-R, 512kB Cache)

Peripherals
LPC Hub Controller 1 : Giga-Byte IXP SB600/700/800 SMBUS Controller
LPC Hub Controller 2 : ATI (AMD) SB700/800 LPC host controller
LPC Legacy Controller 1 : ITE IT8720F
Audio Device : Giga-Byte IXP SB600 High Definition Audio Controller
Audio Codec : Realtek Semi Realtek 885 High Definition Audio
Audio Device : Gammagraphx HD48x0 audio
Audio Codec : ATI (AMD) HDMI Audio
Serial Port(s) : 1
Disk Controller : Giga-Byte SB700/800 SATA Controller [IDE mode]
Disk Controller : Giga-Byte SB700/800 IDE
Disk Controller : Giga-Byte JMB36X PCIE-to-SATAII/IDE RAID Controller
USB Controller 1 : Giga-Byte SB700/800 USB OHCI0 Controller
USB Controller 2 : Giga-Byte SB700/800 USB OHCI1 Controller
USB Controller 3 : Giga-Byte SB700/800 USB EHCI Controller
USB Controller 4 : Giga-Byte SB700/800 USB OHCI0 Controller
USB Controller 5 : Giga-Byte SB700/800 USB OHCI1 Controller
USB Controller 6 : Giga-Byte SB700/800 USB EHCI Controller
USB Controller 7 : Giga-Byte SB700/800 USB OHCI2 Controller
FireWire/1394 Controller 1 : Giga-Byte TSB43AB23 1394a-2000 OHCI PHY/link-layer Controller
SMBus/i2c Controller 1 : ATI SB700 SMBus

Printer : Lexmark E232 (MS) (600x600, USB)

Network Services
Network Adapter : Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC (NDIS 6.20) (Ethernet, 100Mbps)
Network Adapter : Realtek RTL8139/810x Family Fast Ethernet NIC (Ethernet)
Network Adapter : Hamachi Network Interface (Ethernet, 100Mbps)

I'd like to note that the last version that worked on this machine was Alpha 2.

Latest build tested is hrev42942

[diver]

Please provide some additional information.

[lxstoian]

My screen goes black after the first boot icon. I can't get to kdl or find any other information.

[Disreali]

As documented in the ​Haiku User Guide you can hold SHIFT while booting to get the BootLoader Options. Since you have a Radeon HD4800 card, I'd start with selecting safe-mode-video. If that does not work experiment with some of the other options.

[lxstoian]

I tried everything. Nothing will make Haiku boot on this machine. With the latest build I cant even get to the BootLoader Options screen. It reads the usb or cd with haiku and restarts. Black screen.

[yongcong]

Dear lxstoian,

would you please try the patch in #8111?

Thanks

[lxstoian]

Replying to yongcong:

Dear lxstoian,

would you please try the patch in #8111?

Thanks

I don't have a machine set up to build Haiku, so I can't test any patches unless they are part of a nightly.

[tqh]

The patch is applied in hrev44025. Please test with nightly that has this change.

[lxstoian]

Absolutely no change in the bug behavior.

[waddlesplash]

Still an issue?

[waddlesplash]

No reply.

[nielx]

Remove milestone for tickets with status = closed and resolution != fixed