Opened 6 years ago
Last modified 2 months ago
#14236 new bug
Thinkpads Trackpoint and Touchpad sometimes doesn't work after boot
Reported by: | miqlas | Owned by: | nobody |
---|---|---|---|
Priority: | normal | Milestone: | Unscheduled |
Component: | Drivers/Input/PS2 | Version: | R1/Development |
Keywords: | touchpad, trackpoint | Cc: | |
Blocked By: | Blocking: | #17311 | |
Platform: | All |
Description
Happend with x200s and now with T440s.
The trackpoint (the small red rubber thing in the middle of the keyboard) mostly works, but sometimes it is dead after booting Haiku.
I would say there is 3 cases:
- after boot trackpoint and touchpad works ok
- after boot trackpoint dead, touchhpad works ok
- after boot neither works
(- i haven't seen yet working trackpoint but dead Touchpad)
Interestingly in the third case the Touchpad recognizes the first 1-2 mm movement, but then it never reacts anymore. A reboot solves this problem. Keyboard is not affected.
In the syslog i see only: "KERN: ps2: reset failed"
Haiku: x86_64 hrev52047.
Attachments (3)
Change History (14)
by , 6 years ago
Attachment: | syslog.trackpoint.grep added |
---|
comment:1 by , 6 years ago
I see something very similar on my x131e AMD e2-1800. Seems to run Hrev52246 pretty well other than no wifi (its BCM43228 I may have a realtek or intel card I can switch it to will have to check but it has to be on the laptop's whitelist unfortunately)
I installed Haiku from qemu wit -cdrom anyboot.iso -device file=/dev/sda,index=0,type=disk,format=raw -boot d
rebooted (chainloaded the Haiku partition from syslinux) trackpad worked on the first native reboot, trackpoint did not, warm rebooted same thing, also the trackpad was acking wierd button clicks were not working as expected and it was registering clicks from the touchpad itself too often making it hard to go through the menus etc.. did a cold reboot and it works. Note the syslog still shows the PS/2 reset errors but it works seemingly without issues both trackpad and trackpoint are very usable. Syslog on the working reboot says reset failed, after loading the ps2 driver, right after /input/mouse/ps2/0 is published and right after ps2/1 is published, this is followed by ps2/2 and ps2/synaptics_3, the keyboard and then ps2/ibm_trackpoint_3 being published. I can attach syslogs once I get it on the internet if needed.
Note the wifi on this laptop experiences a similar issue on Linux/Windows, sometimes it doesn't come up after a warm reboot. Through I haven't noticed this yet on Linux 4.17 it may have been fixed.
Also note I have 5 of these laptops very robust but not very fast... runs Haiku snappily though. One on the nicest keyboards you'll find on a subnotebook.
comment:2 by , 6 years ago
comment:3 by , 6 years ago
Component: | Drivers/Mouse → Drivers/Input/PS2 |
---|---|
Keywords: | ps2 removed |
comment:4 by , 4 years ago
I can also replicate this on my T460s, on R1Beta2. What can I do to help?
comment:5 by , 3 years ago
Blocking: | 17311 added |
---|
comment:7 by , 2 years ago
t460s: trackpad does not move. buttons look ok. trackpoint does not work also.
/proc/bug/input/devices
I: Bus=0011 Vendor=0002 Product=0007 Version=01b1 N: Name="SynPS/2 Synaptics TouchPad" P: Phys=isa0060/serio1/input0 S: Sysfs=/devices/platform/i8042/serio1/input/input6 U: Uniq= H: Handlers=event7 mouse0 B: PROP=5 B: EV=b B: KEY=e520 10000 0 0 0 0 B: ABS=660800011000003`
I: Bus=0011 Vendor=0002 Product=000a Version=0000 N: Name="TPPS/2 IBM TrackPoint" P: Phys=synaptics-pt/serio0/input0 S: Sysfs=/devices/platform/i8042/serio1/serio2/input/input9 U: Uniq= H: Handlers=event8 mouse1 B: PROP=21 B: EV=7 B: KEY=70000 0 0 0 0 B: REL=3
comment:9 by , 2 months ago
I believe I have a similar issue on my XPS 9560 (trackpad+keyboard works intermittently, only on some startups; see attached syslog); I will test once hrev58156 is available to update to, but it may be a while before I can say for certain because I often go several days with no issues before they stop working on startup again.
by , 2 months ago
Attachment: | syslog_not_working added |
---|
comment:10 by , 2 months ago
Never mind, ended up being quick - still same issue as of hrev58155; see attached syslog.
by , 2 months ago
Attachment: | syslog_new_not_working added |
---|
comment:11 by , 2 months ago
Same failures in both:
KERN: ps2: keyboard reset failed, status 0x80000009, data 0xff KERN: ps2: keyboard getid failed, status 0x80000009, data 0x0000. Assuming no keyboard KERN: ps2: keyboard probing failed
Grepped syslog