Opened 16 years ago

Closed 15 years ago

#2489 closed bug (fixed)

No boot when HyperThreading is activated

Reported by: VinDuv Owned by: axeld
Priority: normal Milestone: R1
Component: System/Boot Loader Version: R1/pre-alpha1
Keywords: Cc: vincent.duvert@…
Blocked By: Blocking:
Platform: x86

Description

I am currently testing Haiku on a PC with two (physical) Xeon processors.
If HyperThreading is activated, when I start Haiku, the system reboots almost instantly. I can not get into the boot menu.

Haiku works fine if I disable HT.

Attachments (2)

sysinfo.txt (1.8 KB ) - added by VinDuv 16 years ago.
sysinfo output
syslog.txt (77.8 KB ) - added by VinDuv 16 years ago.
/var/log/syslog

Download all attachments as: .zip

Change History (8)

by VinDuv, 16 years ago

Attachment: sysinfo.txt added

sysinfo output

by VinDuv, 16 years ago

Attachment: syslog.txt added

/var/log/syslog

comment:1 by VinDuv, 16 years ago

I used a serial cable to get the serial log. Before rebooting, it just prints :

No APM available.

smp: using ACPI to detect MP configuration.

(tested with hrev27178)

comment:2 by jackburton, 16 years ago

Is this bug still valid ?

comment:3 by VinDuv, 16 years ago

Cc: vincent.duvert@… added

Sorry, I did not see your message earlier. Yes, it is still restarting right after selecting Haiku in Grub. (i tested with hrev28874)

comment:4 by VinDuv, 16 years ago

I made new tests with Haiku hrev31297. The boot process goes further (I can access the boot menu), but it stops before the first icon light up. Haiku still runs fine if HyperThreading is disabled.
Should I open a new bug, or update this one ?

comment:5 by jackburton, 15 years ago

You could add the new syslog. FYI, I am able to boot haiku at least on one hyperthreading-enabled p4.

comment:6 by VinDuv, 15 years ago

Resolution: fixed
Status: newclosed

I just tested again with hrev36250, and Haiku now seems to work fine in both non-HT and HT modes :-)
Closing this bug as fixed.

Note: See TracTickets for help on using tickets.