Opened 13 years ago

Closed 3 years ago

Last modified 2 years ago

#4586 closed bug (not reproducible)

Master drive not seen on /dev/disk/atapi/1/

Reported by: Malthus Owned by: marcusoverhagen
Priority: normal Milestone:
Component: Drivers/Disk Version: R1/alpha1
Keywords: Cc:
Blocked By: Blocking:
Platform: All


This relates to this thread I started relating to kernel panics in R32959 I was getting consistent panics reporting: "page fault but interrupts were disabled touching address 0x00000010 from eip 0x008428cc Thread 25 "media checker" running on CPU0" whenever the cd drawer closed. Only on the master drive.

On advice in that thread that much had changed in the disk controller I upgraded to R1/alpha1 Revision 33109 before trying again.

Now, I get no kernel panics but the master drive is not seen at all - disks do not appear in the Mount menu, nor does /dev/disk/atapi/1/master appear in Drive Setup. The slave drive is seen and works properly.

Also, I assume this is related: At the point where I had written an install disk of the R1/alpha1 ISO I tried to install it from the master drive; the machine booted from the disk but then immediately took me into the existing R32959 system with no further user input. I had to put the disk into the slave drive for the install process to work as it should.

Attachments (3)

syslog.txt (75.4 KB ) - added by Malthus 13 years ago.
sysinfo-output.txt (1.2 KB ) - added by Malthus 13 years ago.
listdev-output.txt (1.4 KB ) - added by Malthus 13 years ago.

Download all attachments as: .zip

Change History (7)

by Malthus, 13 years ago

Attachment: syslog.txt added

by Malthus, 13 years ago

Attachment: sysinfo-output.txt added

by Malthus, 13 years ago

Attachment: listdev-output.txt added

comment:1 by mmadia, 13 years ago

Component: - GeneralDrivers/Disk
Owner: changed from axeld to marcusoverhagen

reassigning to marcus.

comment:2 by waddlesplash, 3 years ago

Still an issue?

comment:3 by waddlesplash, 3 years ago

Resolution: not reproducible
Status: newclosed

Malthus sent me an email saying he'd lost his bug-tracker login, but that he doesn't have this hardware anymore anyway. So, closing as not reproducible.

comment:4 by nielx, 2 years ago

Milestone: R1

Remove milestone for tickets with status = closed and resolution != fixed

Note: See TracTickets for help on using tickets.